Cleaning Instructions
How do I clean my blinds?
Vertical Blinds
Roman Shades
Cellular Shades
Pleated Shades
Aluminum Blinds
Composite & Faux Wood Blinds
Wood Blinds
Vinyl Blinds
Natural Shades
Shutters
Vertical Blinds
Vinyl Louvers
- Regularly dust or vacuum with an upholstery attachment.
- For soil removal, sponge with a mild detergent and warm water solution and blot dry.
- Louvers may be removed and immersed in water.
- If a thin film of mild detergent is left on louvers, static electricity will be eliminated.
Fabric Louvers
- Regularly dust or vacuum with an upholstery attachment.
- For soil removal, sponge with a mild detergent and warm water solution (or dry fabric cleaner) and blot dry.
- Do not immerse in water or dry clean.
Roman Shades
- Remove the shade from its window; open it and lay out on a clean, flat surface.
- If the shade is dusty, vacuum with an upholstery attachment.
- To clean fingerprints or soiled spots, use an aerosol spray foam upholstery or fabric cleaner such as Woolite® or ScotchGard® upholstery cleaners.
- Spray the foam cleaner over the entire area to be cleaned. Immediately scrub the area with a clean damp sponge (back and forth gently) until the stains are removed. Be careful not to crush or wrinkle the fabric.
- Remove excess water from the fabric by patting with a clean, dry towel. Hang the shade up when completely dry.
- Do not use strong detergents or spot removers. Dry cleaning is not recommended. Due to the differences in ultrasonic cleaning operators, we do not recommend this method of cleaning.
![]()
Cellular Shades
Regular Cleaning
- Dust with a feather duster.
- Lightly vacuum fabric with an upholstery attachment.
Soil Removal
- Sponge with a mild detergent and warm water solution and blot dry. (Extra care should be used when cleaning blackout fabrics, as the fabrics could become permanently creased.)
- Do not use strong detergents or spot removers. Dry cleaning is not recommended. Due to the differences in ultrasonic cleaning operators, we do not recommend this method of cleaning.
Pleated Shades
- Remove the shade from its window; open it and lay out on a clean, flat surface.
- If the shade is dusty, vacuum with an upholstery attachment.
- To clean fingerprints or soiled spots, use an aerosol spray foam upholstery or fabric cleaner such as Woolite® or ScotchGard® upholstery cleaners.
- Spray the foam cleaner over the entire area to be cleaned. Immediately scrub the area with a clean, damp sponge (back and forth gently in the direction parallel to the pleats in the fabric) until stains are removed. Be careful not to crush or wrinkle the fabric.
- Remove excess water from the fabric by patting with a clean, dry towel. Hang the shade up when completely dry.
- Frequent cleaning may tend to remove the fullness and body of the pleated fabric.
- Do not use strong detergents or spot removers. Dry cleaning is not recommended. Due to the differences in ultrasonic cleaning operators, we do not recommend this method of cleaning.
Aluminum Blinds
Regular Cleaning
- Lightly vacuum with an upholstery attachment.
Soil Removal
- Sponge with a mild detergent and warm water solution and blot dry.
Composite & Faux Wood Blinds
Regular Cleaning
- Lightly vacuum with an upholstery attachment.
Soil Removal
- Sponge with a mild detergent and warm water solution and blot dry.
Wood Blinds
Regular Cleaning
- Lightly vacuum with an upholstery attachment.
Soil Removal
- Painted Finish: clean with a soft, damp cloth.
- Stained Finish: treat with a lemon oil or other wood preservative.
Vinyl Blinds
Regular Cleaning
- Lightly vacuum with an upholstery attachment.
Soil Removal
- Sponge with a mild detergent and warm water solution and blot dry.
Natural Shades
Regular Cleaning
- Occasional light vacuuming with a brush attachment should keep shades clean.
![]()
Shutters
Regular Cleaning
- Lightly vacuum with an upholstery attachment.
Soil Removal
- For minor soiled areas, clean with warm water using a clean cotton cloth. Dry with a second clean cotton cloth.
- For more severe soiling, use a mild detergent diluted to a 5% solution with room temperature water. Clean with a clean cotton cloth. Wipe area with clean water to remove any detergent residue and dry with a clean cotton cloth.






